Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Aelia

#1
In the interest of keeping those of you in this thread updated;

I have been promoted to a new position (Head of Operations Division) and will not be speaking on behalf of Rovers. I have advised the new Department Head and his Seconds that they should create and maintain a new thread with the 2015 policy as soon as possible.

In the meantime, should you have questions or concerns about cosplay props or policies, please email [email protected]

Thank you.
#2
Quote from: Monokuru on May 14, 2014, 12:00:27 PM
I may be going as LAW from the game Tekken, I've read the rules where that costumes cannot expose the body in such ways. The character is shirtless and I also wanted to go shirtless for this cosplay. I was wondering if its ok or not to cosplay this shirtless character for the convention.
It should be fine? Unless we receive complaints (which we don't usually, as long as it's just bare torso) you can do that.

Quote from: azreale on May 14, 2014, 03:34:58 PM
I'm wondering if my prop "gundo" would be allowed?

it does look like a sniper rifle, but there is no trigger and its made of pvc
i've seen plenty of Yoko cosplayers with "guns" so i was wondering it its the same principle & ok to bring?
The issue is always with the prop itself, and not usually what it's based off of. If it looks like a real gun, then no. If it looks like a prop, then it's fine.

Quote from: phantomblackwings on May 15, 2014, 10:16:22 PM
I'm planning on making a Casey Jones from TMNT and his main 'weapon' is a hockey stick/ goalie hockey stick...so can that be peacebonded if i make a back strap for it ( its a wooden actual hockey stick)and the main part sticking out, or should i make one out of foam materials. or a wooden legit hockey stick with orange painted at the edge of it
Be aware of your surroundings, don't hit people with it. Carry it vertically, and abide by behavior expectations.

Quote from: Zephyr40k on May 16, 2014, 08:47:06 PM
Quote from: Aelia on May 02, 2014, 12:08:29 PM

Quote from: MomPacksMyLunch on April 25, 2014, 12:36:36 PM
I'm a little lost here on how bows are allowed.
Can I have a real bow, but strung with elastic string for the entire time? Or is unstrung required?

It would have to be strung with a fake string in such a way that it clearly cannot shoot, or peacebonded unstrung.

Hi there, thanks for all your help.  I'm planning on cosplaying Green Arrow and need to figure out a way I can bring a bow without breaking your rules.  I've read this forum carefully and I wanted to know if I had a very low-poundage bow and strung it with dental floss, would that be acceptable, as in falling under your "strung with fake string" rule?  That would make it impossible to actually draw the bow, because if you did the floss would instantly break. 
Thgat should be fine?

Quote from: Ultima75000 on May 20, 2014, 08:24:03 PM
I'm using an hollow metal pipe as a staff. It has no edges, not rusty and both ends are covered however it is metal and it's heavier than a plastic pipe. (Though the wooden stick I bought originally is for some reason heavier) Would the pipe be counted as live steel or too heavy to be carried as a prop?
A staff for... what?
#3
Quote from: Pwnking on May 09, 2014, 03:18:01 AM
I have a nerf water gun and im not really sure how to make it not work (aside from not putting water in it. duh) Would removing the part that would usually makes sure the water doesn't  spill out and covering the nozzle where water would come out with another orange material be appropriate?
Sounds okay. We could additionally peacebonded the trigger back so it couldn't be used.
#4
Quote from: oh.heyy on May 07, 2014, 01:40:40 PM
Quote from: Aelia on April 19, 2014, 08:59:41 AM
Quote from: BonjourHoney on April 09, 2014, 06:02:58 PM
Would something like this be allowed for a historical cosplay? If not, is there any way it can be modified to be allowed? It's non firing and made of wood with the permanent neon orange tip, but the little details are made of metal.

Clicky~

Edit: Dunno if it matters, but since this prop's appearance is earlier than (the year) 1899, it would be defined as 'antique' and even a real gun of the same year (1807 in this prop's case) would be allowed to be open carried in California so long as it were unloaded, according to PC 16520(d)(5).
Honestly, I'd say it's okay, and I'd like to approve it so long as you understand that if any convention center staff object-- the people who actually work for the building-- we may h ave to ask you to put it away.

Quote from: oh.heyy on April 10, 2014, 12:17:15 AM
I plan on cosplaying Kitsurubami from FLCL in the paintball fight episode where she has a sniper rifle and I'm making the gun out of styrofoam, clay, cardboard, and wood. I'm making it as flat and basic as I can but was wondering if it will still be classified as "realistic" and not allowed.  here's a reference picture of her and my prop: [It's not painted yet but the green binocular next to it is what color it will be.]
http://www.cosplayisland.co.uk/files/costumes/3320/75753/CI_75753_1363013046.jpg  http://oi62.tinypic.com/5v68uo.jpg
You will need to find a way to tag it with neon orange somewhere near the tip.

Ok, so I finally completed my prop and found some bright orange clay to put on the front. Is this alright? http://oi61.tinypic.com/27yfex.jpg

Looks good to me.
#5
Quote from: ChauMein29 on May 05, 2014, 07:06:32 PM
QuoteIn MoH Warfighter, Task Force Blackbird is said to be a fictional representation of the CIA's division of special/paramilitary operatives. And in Battlefield 3, the Engineer wears an EOD patch, which signifies Explosives Ordnance Disposal, a specialized unit in almost every LEO or Military whose specilization is stated in its name. There are links to the two patches below, and I was wondering if patches fall under that category, and if the two patches are OK to wear. I know I might seem silly for asking a question about patches, but I just want to be sure. Thank you for your time!
EOD Patch: http://www.evike.com/product_info.php?products_id=38835
TF Blackbird Patch: http://lbxtactical.com/collections/patches/products/blackbird

Hello again! I was the person last year that asked about the question regarding the patches. I didn't end up going last year BUT I do plan on going this year. I was wondering about the policy about them this year. Also one more very redundant question. I plan on purchasing a safety orange training gun for my cosplay (http://www.manventureoutpost.com/products/BlackHawk-Demonstrator-Sig-226-Demonstrator-Gun-Polymer-Orange-44DG226ROR.html?google=1&gclid=COHWq7Walr4CFYqFfgodM5cA0g). Are those peace-bondable? If not, I don't really mind. Get to save some money that way.

The second patch isn't loading? I'd say they should be fine.

The prop weapon would have to be in a safety color (bright blue or bright orange) with absolutely no alterations from the factory "safety" colors. It would be a very tentative approval, and at the first issue, we would have to ask you to put it away for the weekend. (If you can cosplay without it, we would prefer that.)
#6
Quote from: Silverlit on May 03, 2014, 02:42:29 PM
Hello! I was going to cosplay Russia from hetalia, and I was wondering if it would be alright if I could bring my faucet pipe that goes with the cosplay? It's 100% plastic, is only spray-painted to look like metal, and is about a foot and a half long. I can tape/paint one of the tips a fluorescent color if it looking like it's metal is a problem.
A faucet? I don't see why not? Just don't try to drown anyone with it or anything, k?

Quote from: Metriosity on May 04, 2014, 09:45:17 AM
Hi there, I just have a quick question about whether I need to paint a bright orange tip on my ADAM syringe. It's the first time I have done this cosplay so I don't know the drill.

I know that "Gun like props" need the safety thingy, but as this isn't really a gun like anything I'm not sure. I thought I would ask so that I can make sure I am all good when I show up for peace bonding. The syringe looks like this (http://fc09.deviantart.net/fs70/f/2010/340/e/2/bioshock_adam_syringe_by_ixbelongx2xl-d34du96.png)

But I don't have a metal needle, I have a plastic tube. Pretty flexible so couldn't do any damage to any people or cupcakes... Ok maybe it could damage a cupcake, but people will be ok.

If possible I'd prefer not to paint it orange or whatever as I spent ages painting the thing already. But I'll go with whatever rules you hand down. 
I'd say that's pretty clearly a prop and is'nt really "gun-like" in the sense that we mean, so it shouldn't need the orange.
#7
Quote from: bullseye117 on April 23, 2014, 04:27:05 PM
What is the verdict on bullet belts? No weapon attached, just the belt itself?
Thanks!

Neither real bullets nor realistic replicas are allowed.

Quote from: MomPacksMyLunch on April 25, 2014, 12:36:36 PM
I'm a little lost here on how bows are allowed.
Can I have a real bow, but strung with elastic string for the entire time? Or is unstrung required?

It would have to be strung with a fake string in such a way that it clearly cannot shoot, or peacebonded unstrung.

Quote from: Admiral Donuts on April 25, 2014, 10:01:04 PM
Shouldn't this be the 2014 thread?
At this point changing the date seems like a moot point. I've been answering based on 2014 rules since last year.

Quote from: raininshadows on May 02, 2014, 10:15:06 AM
I'm trying to cosplay Eridan from Homestuck. My question is, would this count as "painted all over in a bright safety-color", or will I need to add some orange?



It's very bright blue, which might serve to indicate that it's not real, but I'm not that well acquainted with the protocol. Thanks!
It depends entirely upon construction so in this case I cannot make a determination.

Quote from: Jingles on May 02, 2014, 12:01:40 PM
Hello. I have two cosplays in mind this year - one would involve a wooden wizard staff, and the other a briefcase. So I have two questions:

Would a wooden walking stick (like this http://www.ebay.com/itm/58-Natural-Spiral-Vine-Twisted-Hiking-Walking-Staff-Craft-Wood-Carving-Blank-30-/191156041349?pt=LH_DefaultDomain_0&hash=item2c81c9b685) be allowed for a person without a disability if it was part of a costume? Or maybe a shorter but similar staff? Is there a type of wood that would be more likely to get peacebonded?

Would a rolling briefcase be allowed, and would it need to be peacebonded?

A walking staff has nothing to do with disability. It would be treated as a staff prop. A rolling briefcase would not need to be peacebonded.
#8
Quote from: HeeroYuy135 on April 22, 2014, 12:46:09 PM
Quote from: Aelia on April 22, 2014, 06:11:22 AM
Quote from: HeeroYuy135 on April 21, 2014, 11:46:36 PM
I've been told that if I gutted my airsoft (which I did, I took out all the internal parts and cement glued the barrel with a machine screw with the orange tip still intact) that I can get it approved by both SJPD and Fanime Rovers even though it's still black. Can someone guide me along with this?
I don't know who told you that, but they lied. We never allow airsoft regardless of functionality.
Quote
Gun-like props must have a non-removable orange tip at the end of the barrel which is visible from the side and which extends at least one inch up the side of the barrel, or they must be painted all over in a bright safety-color. They cannot have any functional parts, and must not be usable.
So what's this then?

A segment that doesn't pertain to airsoft.
#9
Quote from: HaiChristie on April 21, 2014, 11:34:24 PM
I'm going to be doing this cosplay and was just curious how I go about getting it peace-bonded/where.
http://lol.ucoz.org/tristana.jpg
I'm still in the processes of making it but as it is now it's almost 4 feet in length

You bring it to a peacebonding station.
#10
Quote from: somegirlkatie on April 19, 2014, 06:59:18 PM
Hello! I am making this bow: [].


I don't intend to make it able to fire anything. I do not want that at all. I am going to make it out of expanding foam, with either worbla or fiberglass/bondo ontop of it.

Is this okay?

As long as it is clearly a prop, you're good. (I'd say it qualifies.)
#11
Quote from: HeeroYuy135 on April 21, 2014, 11:46:36 PM
I've been told that if I gutted my airsoft (which I did, I took out all the internal parts and cement glued the barrel with a machine screw with the orange tip still intact) that I can get it approved by both SJPD and Fanime Rovers even though it's still black. Can someone guide me along with this?

I don't know who told you that, but they lied. We never allow airsoft regardless of functionality.
#12
Quote from: BonjourHoney on April 09, 2014, 06:02:58 PM
Would something like this be allowed for a historical cosplay? If not, is there any way it can be modified to be allowed? It's non firing and made of wood with the permanent neon orange tip, but the little details are made of metal.

Clicky~

Edit: Dunno if it matters, but since this prop's appearance is earlier than (the year) 1899, it would be defined as 'antique' and even a real gun of the same year (1807 in this prop's case) would be allowed to be open carried in California so long as it were unloaded, according to PC 16520(d)(5).
Honestly, I'd say it's okay, and I'd like to approve it so long as you understand that if any convention center staff object-- the people who actually work for the building-- we may h ave to ask you to put it away.

Quote from: oh.heyy on April 10, 2014, 12:17:15 AM
I plan on cosplaying Kitsurubami from FLCL in the paintball fight episode where she has a sniper rifle and I'm making the gun out of styrofoam, clay, cardboard, and wood. I'm making it as flat and basic as I can but was wondering if it will still be classified as "realistic" and not allowed.  here's a reference picture of her and my prop: [It's not painted yet but the green binocular next to it is what color it will be.]
http://www.cosplayisland.co.uk/files/costumes/3320/75753/CI_75753_1363013046.jpg  http://oi62.tinypic.com/5v68uo.jpg
You will need to find a way to tag it with neon orange somewhere near the tip.
#13
Quote from: Smile Bot on April 06, 2014, 03:55:49 PM
It's for the crash test dummies in Capital Cities - Safe & Sound



Specific part of the video here:

https://www.youtube.com/watch?v=KX54fWP-os4#t=00m33s

Generally we say yes to those, on the condition that you do not play it. Or bludgeon anyone with it.
#14
Quote from: InsaneDavid on April 03, 2014, 04:37:49 PM
This thread has been very helpful, thank you!

What about a really big drill?  All foam (with the exception of the hose which is thin plastic tubing) and everything is completely static as the hose can be magnetically attached or removed - it doesn't fire or anything like that.

http://fc07.deviantart.net/fs71/i/2014/059/4/c/taizo_hori_s_p3_drill___complete__dig_dug__by_insanedavid-d78dbk5.jpg

And an ion cannon - ABS, PVC and foam, no triggers, grips are from handheld packing tape dispensers, everything is completely static.

http://th09.deviantart.net/fs71/PRE/i/2014/091/9/5/masuyo_tobi_s_multi_function_ion_cannon__baraduke__by_insanedavid-d7co1dx.jpg
Both of those look fine. Not only are they clearly props, but they're well made. Just come by and get them peacebonded in costume, and be sure you behave while carrying them. ;)

Quote from: Smile Bot on April 06, 2014, 01:19:37 PM
Are musical instruments allowed? Specifically this:



A trumpet? Is there a costume you would need to carry it with?
#15
Quote from: Valcust on March 31, 2014, 07:25:38 PM
Quote from: Aelia on March 31, 2014, 05:18:01 PM
Made of wood it will be fine.

Question: swords made of wood are fine, correct? What if their blades are covered in aluminum tape? It simply gives it the shine and metallic look of live steel, but without any of the sharpness or danger.

I do not see an issue with that.
#16
Quote from: bahamutknightzero on March 30, 2014, 05:53:17 PM
Bit of a question here. Was thinking about doing a Shield (WWE) costume, but the one grey area that I was unsure about if this will clear policy is the vests.

http://images6.fanpop.com/image/photos/35100000/The-Shield-wwe-35136214-1069-605.jpg

Are these kind of vests acceptable by the costume policy?

Quote from: bullseye117 on March 31, 2014, 08:54:38 AM
If I wanted to use this vest would it be okay? The vest is not military regulation and I would not be putting anything on it just it so I figured it would be okay but please correct me if I'm wrong.
Sorry but you are not allowed to view spoiler contents.


Tactical vests like both of those are absolutely a gray area, and the determination always depends on overall effect. If you could be mistaken by a "Muggle" as a SWAT member or other Law Enforcement Agent, then we ask that you not wear it.

Quote from: evas on March 30, 2014, 08:04:16 PM
Hello, I was wondering if this prop would be acceptable:
http://th02.deviantart.net/fs71/PRE/i/2013/141/8/5/kill_la_kill_ryuko_matoi_render_by_mein_herzeleid-d662hwy.png

I'm making it out of wood and plan to make the edges quite dull. Is this acceptable? Is there anything specific I should do to ensure this prop will be acceptable?
Thank you in advance.
Made of wood it will be fine.
#17
Quote from: Nina Star 9 on March 22, 2014, 03:47:21 PM
I have a question about a cosplay that my sister is doing.
She is doing Robin Newman from the Ace Attorney series. As you can see, the character wears a sort of brace made of springs that fit closely to the arms. If my sister used metal springs on this (and made sure that the springs were sewn down well enough to prevent them from working loose during the con), would this be acceptable, or would she have to find another material to make fake springs out of?
Thank you. :]

Metal springs would be allowed.
#19
Quote from: ShamblingUndead on March 09, 2014, 04:41:18 PM
Quote from: Aelia on March 09, 2014, 11:31:48 AM
Quote from: ShamblingUndead on March 09, 2014, 12:00:50 AM
I'm am going to be cosplaying as a Resident Evil character and I wanted to make a gun out of foam, and glaze it somehow to make it not fall apart, if it looks too realistic even with an orange tip, is it not allowed?  I'll be leaving out a trigger and painting the tip orange.
If it looks enough like a real gun that we actually need to consult the orange tip to see if it is a prop, then it is too realistic and is not allowed. Regardless of materials or other factors.

Is there somewhere I can go to see some pictures or something of prop guns that are acceptable at fanime?  I would really like to make my own prop gun but I want to follow guidelines for it being acceptable for the con, is there anything specific I can do to make a prop gun look realistic enough for my cosplay but obvious enough that it is fake?

We do not have pictures. Our guideline has always been that it needs to be distinguishable at 20'.
#20
Quote from: MermaidDrummer4ever on March 18, 2014, 11:37:00 PM
So I bought an expensive sao ‎Lambent Light sword that is part steel/carbon. I know i probably won't be able to bring it in the con because of the rules however, am I allowed to use it in a photoshoot? I remember last year their was a photographer outside of Fairmont and I wanted to know if it would be okay if bring I just bring it to take pictures away from the convention.

It can't come onto our premises but an offsite photoshoot is fine.